• High-end server

• Extended ATX
• Size: 12" x 13.05" (W x H)

• Dual Intelｮ Xeon・processors up to 3.06GHz with 512K L2 cache (with or without 1MB integrated L3 cache)

• Intel E7501 chipset

• 533/400 MHz

• Up to 16 GB ECC registered DDR-200/266 memory in 8 DIMM slots*
• Supports only registered ECC memory. Non-ECC or unbuffered memories are not supported.
• Two-way interleaved memory banks provide outstanding memory performance. (must use a pair of DIMMs for memory to function)
  (Memory recommendation list)

• Total: 6 PCI-X slots

• Max up to 2 64-bit 133MHz PCI-X

Default setting:

• 3 64-bit 100MHz PCI-X

• 3 64-bit 66MHz PCI-X
• 1 VXB (Virtual Extended Bus)

• Support Intelligent Platform Management Interface (IPMI) ver. 1.5 option 
• Support Zero-channel RAID (Adaptec 2010S), card not included 
• Dual EIDE ports support Ultra DMA 100MB/s of Burst data transfer rate, supports UDMA Mode 5, PIO Mode 4 and ATA/100
• Onboard Adaptec AIC-7902 dual channel Ultra320 SCSI controller
• Intel 82546EB dual port Gigabit Ethernet controller
• ATI Rage XL 8MB PCI graphic controller
• 1 Floppy
• 2 Fast UART 16550 serial ports
• 1 ECP/EEP parallel port
• Up to 5 USB ports
• PS/2 keyboard and mouse ports

• Monitoring the voltages of the CPU core and the status of system power supply (+1.8V, +3.3V, + 5V, ｱ 12V) 
• CPU/chassis temperature monitoring
• CPU fan auto-off in sleep mode
• CPU overheat LED header
• LED and control for chassis intrusion detection
• System resource alert
• Support for system management software

• Wake-on-LAN allows for remote network management and configuration of the PC, even in off-hours when the PC is turned off. This reduces the complexity of managing a network.
• Onboard 3-phase switching power regulator supports CPU core voltages from 1.1-1.85 volts
• 6 tachometer fan connectors (for CPU, chassis, and thermal control fans)
• Keyboard wake-up from Soft-off
• CPU frequency settings - changeable in BIOS setup
• Connector for LED overheat indicator
• Overheat backup fan connector for CPU protection

• IPMI (Intelligent Platform Management Interface) 1.5 option
• LDCM (LANDesk Client Manager)
• LDSM (LANDesk Server Manager) option
• SuperO Doctor software (optional)
• DMI support

• RTC (Real-Time Clock) wakeup
• External modem remote ring-on when system is in Soft-Off state
• BIOS rescue hot keys for rescuing BIOS chip from flash failure
• Hardware BIOS virus protection
• Phoenix 4Mb Flash ROM

• ACPI/APM power management
• Internal/external modem ring-on
• Control of power-on mode for recovery from AC power loss
• One WOL (Wake-On-LAN) connector
• One chassis intrusion header 
• Chipkill support
• CPU thermal trip support

• Extended ATX Chassis
• Chassis Guide
• To ensure system stability, a 350W (minimum) ATX12V power supply (besides the 20 pins, both 4-pin and 8-pin +12v power connector) is required.
• Please check Support for more details

• One SUPER X5DP8-G2 mainboard
• CPU heatsink retention and clips
• 1 three-ended 80-wire/40-pin IDE UDMA/100 ribbon cable for high speed UDMA IDE devices
• 1 floppy ribbon cable
• 2 Fan-042 with heatsink
• One BIOS/drivers CD